smart label printer 100 printing crooked

#SMART LABEL PRINTER 100 PRINTING CROOKED DRIVERS#
#SMART LABEL PRINTER 100 PRINTING CROOKED MANUAL#

If the levers are not in the same positions, the images may skew or other print quality or paper feed issues may occur. When printing heavier cardstock or labels, we recommend that the rear cover be left open and BOTH envelope levers be placed in the DOWN position to prevent paper feed or print quality issues. Note: The rear cover should be closed for this test. If the media meets the requirements for the MP Tray, go to Step 13. If the media does not meet the requirements for the MP Tray, replace the media and continue to Step 13. Paper type: Thin Paper, Plain Paper, Thick Paper, Thicker Paper, Bond Paper, Recycled Paper, Envelopes or Labels.

#SMART LABEL PRINTER 100 PRINTING CROOKED MANUAL#

Verify that the media is the correct type, size and weight for the Manual Feed Slot: If the Test Print is still skewed, go to Step 17. If no skew is present or if the skew is acceptable, go to Step 16.ĭ. Note : The back cover can be open when printing from the Paper Tray if the media in the Paper Tray meets the specifications, but the cover should be closed for our test.Ĭ. Make sure that it is completely inserted into the machine. Put the paper tray firmly back in the machine. Make sure that the paper is below the maximum paper mark (1). Fan the stack of media to ensure that no pages stick together.ĩ. For legal and Folio size paper, press the release button (1) in the bottom of the paper tray and then pull out the back of the paper tray.Ĩ. Make sure that the guides are firmly in the slots.ħ. While pressing the green paper-guide release lever (1), slide the paper guides to fit the paper size you are loading in the tray. Any adhesive residue can be removed with a small amount of alcohol and a clean cloth.Ħ. Inspect the front section of the Paper Tray for debris such as tape or label fragments, especially the area surrounding the clear roller and the pad. If the Test Print page is skewed, go to Step 4.Ĥ. The Test Print page will print from the machine. On the control panel of the Brother machine, press Menu, 4 (Printer), 2 (Print Options), 3 (Test Print). We recommend printing the Test Print page since it contains borders that can be used to judge skewing.Ī. Be sure that the Paper Tray is loaded with media. Print an internal document from the machine. If the media meets the requirements for the Paper Tray, go to Step 3.ģ. If the media does not meet the requirements for the Paper Tray, replace the media and continue to Step 3. Maximum Tray capacity: Up to 250 sheets of 20lb (80 g/m 2) plain paper. Paper size Letter, A4, B5 (ISO), A5 (Long Edge), B6 (ISO), A6, Executive, Legal and Folio. Paper type Thin Paper, Plain Paper or Recycled Paper.

Verify that the media is the correct type, size and weight for Tray 1: Go to Step 12 for Manual Feed Slot troubleshooting. Go to Step 2 for Paper Tray troubleshooting. If you are not sure if the issue appears on both trays, perform testing on the tray that currently has the issue. Note: It is not necessary to test both trays.ĭ. If the issue happens from both trays (the customer did testing prior to reporting the issue), go to Step 17. If the issue was identified when printing from the Manual Feed Slot, go to Step 12.Ĭ. If the issue was identified when printing from the Paper Tray, go to Step 2.ī. View All Brother Care Program Eligible ProductsĪ.View All Refurbished - Sewing & Crafting.View All Refurbished - Fax Machines & Scanners.

#SMART LABEL PRINTER 100 PRINTING CROOKED DRIVERS#

Windows 2003 or Windows XP printer drivers do not work with Arial font. NOTE: Be aware that you should have the latest printer drivers installed before uploading fonts. Restart nShift On-premises before making any new prints.Then release the button and it will feed 2-3 blank labels and adjust itself correctly. Calibrate the printer by holding down the button on top of the printer until it has blinked 2 times.

Select Send command, insert the command: ^XA^JBE^XZ, and click Execute.

Select Save current settings and click Execute.

Select Set printer to Nordic character set (Denmark, Norway) and click Execute.

Wait for about 1 minute until the upload is complete.

Select Upload fonts and click Execute.

Insert the command: ^XA^IDE:*.*^XZ and click Execute.

Choose the Commands tab and select Send Command in the drop-down menu.

Open Server Printers, highlight the printer and click the Advanced button.

Choose the Installation level in the setup tree.

Use this article if your Zebra printer doesn't work properly, such as making skewed or crooked labels, pixelated texts, or wrong special characters.

Smart label printer 100 printing crooked